Trojan UVMax whole house and POU ultraviolet (UV) water purifiers

Trojan UVMax Point-of-Use and Standard Whole House UV Sterilizers

Trojan UV Max ultraviolet (UV) water sterilizers are designed specifically to kill harmful microorganisms such as bacteria and viruses in untreated water supplies (well water or private water systems). Ultraviolet (UV) systems are commonly installed by homeowners who have received a positive coloform, e.coli, cryptosporidium, or giardia water test result, as well as those with reason to suspect that they are at higher risk for such contamination, and those seeking to have piece of mind that there water is being properly disinfected prior to consumption. Ultraviolet whole house water sterilizers are exploding in popularity due to their low maintenance requirements, ease of operation, economical purchase price and operating cost, and due to the fact that unlike other treatments designed for microbiological contaminants, UV does not introduce any harmful chemicals to your water. In fact, not only does it not add unwanted harmful chemicals like chlorine to your water, it may even remove some! Germicidal spectrum UV light is often used to destroy harmful volatile organic compounds in industrial applications! Trojan Technologies is one of the world's largest water treatment companies and is regarded as both a pioneer and innovator in the area of ultraviolet water treatment for the home. The Trojan UVMax product line includes a wide range of models suitable for almost any conceivable residential and light commercial water treatment application. The Trojan UVMax Model A through Model F is a popular and economical line of point-of-use and whole house models. The Trojan UVMax Models A and B are designed for point-of-use applications, whereas the Models C, D, E, and F are designed for whole house point-of-entry applications. The new Trojan UVMax Models G, H, and J were designed for higher flow rate applications, and the popular Pro Series Models Pro 10, Pro 20, and Pro 30 were designed specifically for applications where NSF certification is required or desired. Advantages of point-of-use or whole house UV treatment with the Trojan UV Max chemical free approach - no harmful bi-products or chemicals added to your water effectively kills bacteria, viruses, mold spores, fungi, oocysts (cryptospridium and giardia), and other microbiological contaminants simple operation, limited maintenance, and easy installation low initial cost and ongoing operating cost relative to other treatment methods The UV lamp, which is enclosed in a quartz sleeve, produces ultraviolet light that destroys waterborne pathogens such as bacteria and viruses by penetrating the cell wall and deactivating the DNA so they are unable to reproduce. The UV lamp should be replaced annually. For more information on the removal of various contaminants by ultraviolet purification, please CLICK HERE. Which whole house Trojan UVMax ultraviolet (UV) purifier is best for your home is determined largely by the level of contamination and the maximum flow rate required in your home. Pre-filtration (down to 5 micron level) to remove sediment and other general contaminants is required to ensure that an adequate dose of ultraviolet light reaches the microorganisms and to ensure complete disinfection. Optional in-line flow restrictors, emergency solenoid shut-off valves, and UPS back-up power supplies can be added to your system for added protection and functionality. Below, please find details on all of our whole house Trojan UVMax water purifiers, recommended accessories, recommended pre-filters, and links to a wide range of other information to help you with your research. Please call us toll free at 1-866-376-2690 if you would like to discuss your application.

Trojan UVMax water purifiers feature the following benefits:

Learn More About Trojan UVMax:

Standard Trojan UV Max Point-of-Use & Whole House Ultraviolet (UV) Sterilizer Models
	Model A	Model B	Model C	Model D	Model E	Model F
Application	point-of-use only	point-of-use only	small home	small home	average home	large home
Max. Flow Rate (UV dose >30,000 µWs/cm2)*	2 GPM	5 GPM	7.5 GPM	7.5 GPM	15 GPM	25 GPM
Max. Flow Rate (UV dose >40,000 µWs/cm2)*	1.5 GPM	4 GPM	6.5 GPM	6.5 GPM	11 GPM	19 GPM
Audible/Visual Lamp Failure Alarm
Alarm Reset	-	-	-
Elapsed Time Meter	-	-	-
Lamp Replacement Reminder	-	-	-
Electropolished Exterior	-	-	-
UV Intensity Monitor	-	-	-	optional	optional	optional
Flow Restrictor Included?	optional	optional	optional	optional	optional	optional
Solenoid emergency shut-off valve kit	-	-	-	optional	optional	optional
Water Chamber Material	304 stainless steel	304 stainless steel	304 stainless steel	304 stainless steel	316 stainless steel	316 stainless steel
UV Sleeve Material	quartz	quartz	quartz	quartz	quartz	quartz
Inlet/Oulet	3/8 inch FNPT	3/4 inch NPT	3/4 inch NPT	3/4 inch NPT	1 inch NPT	1 inch NPT
Electrical	120v, 60Hz	90-140v, 50/60Hz	90-140v, 50/60Hz	90-265v, 50/60Hz	90-265v, 50/60Hz	90-265v, 50/60Hz
Lamp Power (watts)	25	27	43	43	67	102
Lamp Length	12" 30cm	9.75" 25cm	16" 40.5cm	16" 40.5cm	25.5" 65cm	39.75" 100.5cm
Chamber Assembly Size	15.5 x 2.5" 39 x 6.5cm	13.5 x 3.5" 34 x 9cm	19.5 x 3.5" 49.5 x 9cm	19.5 x 3.5" 49.5 x 9cm	29 x 3.5" 73.5 x 9cm	43.5 x 3.5" 110 x 9cm
Control Module Size	2.8 x 3.3 x 2.3" 7 x 8 x 6 cm	6 x 4 x 2.5" 15 x 10 x 6 cm	6 x 4 x 2.5" 15 x 10 x 6 cm	9.75 x 6 x 2.5" 25 x 15 x 6 cm	9.75 x 6 x 2.5" 25 x 15 x 6 cm	9.75 x 6 x 2.5" 25 x 15 x 6 cm
	Model A	Model B	Model C	Model D	Model E	Model F
	Ground shipping within USA is included at no extra charge on all Trojan UVMax UV systems!
Price (US$) Free shipping in USA!	$269.95 BUY NOW	$349.95 BUY NOW	$389.95 BUY NOW	$509.95 BUY NOW	$679.95 BUY NOW	$819.95 BUY NOW
	Trojan UVMax Model A	Trojan UVMax Model B	Trojan UVMax Model C	Trojan UVMax Model D	Trojan UVMax Model E	Trojan UVMax Model F

Trojan UVMax Best Price Guarantee We will not be undersold! If you find a lower advertised price anywhere, we will beat it! Simply call us toll free at 1-866-376-2690 to order and provide proof of the lower price (fax copy of flyer or name and phone number of store). Conditions: The product must be the same, in new condition, in its original packaging and be sold with a valid warranty. Competitor must have item in stock. Our best price guarantee applies to advertised prices of a competitor at the time of your original order only. Please note, price guaranteed is the total price inclusive of shipping to selected destination.

Other Trojan UVMax Models
Point of Use Trojan UVMax Models A & B up to 5 GPM	Standard Whole House Trojan UVMax Models C, D, E & F up to 25 GPM	High Output Series Trojan UVMax Models G, H & J up to 45 GPM	NSF-Certified Trojan UVMax Pro Series up to 30 GPM

	Recommended Pre-treatment

All UV sterilizers required sediment pre-filtration to reduce or eliminate the possibility that a targeted contaminant could "hide" behind a sediment particle in the "shadow" of the UV light and therefore not receive a full dose of UV light. Accordingly, the manufacturer strongly recommends sediment pre-filtration down to a level of 5 microns or smaller. Water exceeding 120 ppm in hardness (7 grains per gallon) should be softened to reduce the risk that hard water mineral scale will build-up on the UV sleeve thereby reducing UV light distribution into the UV chamber. Similarly, iron levels exceeding 0.3 ppm should also be treated to prevent staining of the UV sleeve. Elevated levels of certain other contaminants, such as organics, can cause a reduction in UV transmittance (the ability of the water to transmit UV light). If the UV transmittance (UVT) of your water is less than 75% after the above-mentioned pre-treatment, activated carbon filtration may be desirable to improve UV transmittance. The majority of deep wells have a UVT of 85% or greater. If your UVT is unknown, select a model with a higher flow rate capacity then you feel you will really require (this will provide a higher UV dose at your desired flow rate), or add an activated carbon pre-filter to your system. We recommend the following pre-filter equipment:

WH1B+ 5 Micron Sediment Pre-Filter Package excellent overall sediment pre-treatment to 5 micron level	WH2 Sediment & Activated Carbon Pre-Filter Package sediment pre-treatment to 5 microns and improves UV transmittance by removing organics and other contaminants that reduce UVT	WH5 Iron Reduction Filter Package very cost effective iron pre-treatment filter for iron levels ranging from 0.3 to 5.0 ppm

	Recommended Accessories

not exactly as shown

Solenoid Emergency Shut-off Valve Kit - in the event of a power failure or electrical outage to your home, your UV lamp in your UV system will lose power. This could leave your home unprotected if someone turns on a water faucet. Some bacteria and other waterborne pathogens can also swim past an un-powered UV lamp and reach the downstream portion of your water system and therefore not receive a dose of UV light once the power is restored. The same situation could occur in the event of a UV bulb failure (rare, but possible). The solenoid emergency shut-off valve kit is installed at the output of your Trojan UV system and will physically close a valve in the event of a bulb burn-out, or power failure, thereby preventing any contaminant from passing through the system untreated. This feature will also turn off the water supply if there is a UV intensity loss (for models equipped with a UV intensity monitor). This kit is highly recommend for all homes with a known bacterial, virus, or cyst contamination problem, and for all homes with an electrical supply that is prone to frequent outages.

BUY NOW w/ 3/4 INCH VALVE! Recommended For: Model D US$269.95 FREE SHIPPING! BUY NOW w/ 1 INCH VALVE! Recommended For: Models E, F, Pro7, & Pro15 US$279.95 FREE SHIPPING! BUY NOW w/ 1 INCH VALVE! Recommended For: Models G, H, J, Pro10, Pro20 & Pro30 US$139.95 FREE SHIPPING!

Flow Restrictors - A flow restrictor can be installed immediately prior to your UV sterilizer to ensure that you cannot exceed what would be considered the safe maximum flow rate for your respective model. A flow restrictor is recommended for all homes with a known bacterial, virus, or cyst (giardia or cryptosporidium) contamination problem. We offer a wide range of restrictors with capacities ranging from 1.5 to 20 gallons per minute in both stainless steel and chrome-plated brass.

For more information on flow restrictors for Trojan UVMax sterilizers, please visit our Trojan UVMax flow restrictors page.

Installation	Warranty / Other Info.
Installation is straightforward for any licensed plumber or a homeowner with some plumbing experience. Plumbing connections are standard NPT thread (3/8, 3/4 inch or 1" depending on the model). It is recommended that standard manual shut-off valves be installed before and after the UV sterilizer. Optional flow restrictors and emergency solenoid shut-off valves are available for many models. The electrical supply is obtained from a standard 110-120v electrical outlet (some models can be operated at 240v). See notes above regarding recommended pre-treatment. Detailed installation instructions are provided with your system.	Trojan UVMax ultraviolet systems are covered by a 5 year limited structural, hardware, and electrical components warranty and a 1 year limited lamp, sleeve, and UV sensor warranty. For health reasons, we do not accept returns of water filters. If you are in doubt as to which filter is best for your needs, please feel free to call us toll free at 1-866-376-2690. For more details regarding the Trojan UVMax warranty, CLICK HERE.